Widely on LOGO screen, advertising board, applied to hotel, bars, wedding, party lighting and Mother's Day, Halloween, Christmas holiday lighting decor. Really good for replace the traditional neon signs. EASY TO PROGRAM. Works great with Arduino, FastLED library, Raspberry Pi & FadeCandy etc. It can also be controlled by SP105E and other pre-programmed WS2811 controllers.
The WS2812B strip is low power consumption, Super-bright but running with low temperature. And every 5050 RGB SMD built-in one WS2811IC Chip, realize individually Addressable, means every one led lighting effect can be controlled, each LED is programmable, with 8 bits of red, green, and blue data shifted in for 24 bit color, Strips take data in green, red, blue order. Match use controller can appear colorful curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software. Parameter ?Brand: Aclorol ?IC type :WS2811 IC ?Gray level: 256 ?View angle: 120 ?Input voltage: DC5V ?Color: full color 24-bit ?FPCB board color: Black ?Power:43W/3. 3ft, 0. 3W/LED, 144LEDs/3. 3ft ?Recommended power supply?DC5V10A (50W) ?Length: 3. 3ft /roll ?Operating Temperature:-20 plus 40 C ?Led Qty: 144pcs 5050SMD ?The distance between two LEDs?5. 5mm ?L x W x H?1000mmx12mmx2mm ?Wave length (nm): Red, 650nm Green,520nm Blue,460nm ?Waterproof level: non-waterproof Package: 1x 3. 3ft WS2812B LED strip Kindly note : 1) It comes without power supply and controller. You'll need a controller such as an Arduino to use them. 2) The work voltage of the LED string must be under 6V DC. Otherwise, it will be burnt out. 3) If you want to hook up more than one string, an external power supply is very necessary.